Application of Kwh Energy Electricity Meters
Model DDS3666 single-phase ANSI meter is a kind of new style single phase two wire active energy meter, it adopts micro-electronics technique, and imported large scale integrate circuit, uses advanced technique of digital and SMT techniques, etc. The meter completely accords with relevant technical requirements of class 1 single phase active energy meter stipulated in international standard IEC&ANSI standard.
Features of Kwh Energy Electricity Meters
- Kwh/MD/V/A display, Back-up battery
- Comply with ANSI C12.1/ ANSI C12.10/ANSI C12.18/ ANSI C12.19/ ANSI C12.20
- Maximum demand measurement and resetting
- Bidirectional measurement, Reverse energy calculated into forward
- Current flow direction indication
- LCD simulation disk
Technical Parameters of Kwh Energy Electricity Meters
Specification | DDS3666/1S | DDS3666/2S | |
Accuracy | Active | Class1.0 | Class1.0 |
Voltage | Rated | 120/240V | 120/240V |
Range | 0.9Un~1.1Un | 0.9Un~1.1Un | |
Limit | 0.8Un~1.2Un | 0.8Un~1.2Un | |
Frequency | 50/60Hz | 50/60Hz | |
Current | Range | CL100,CL200 | CL100,CL200 |
Starting Current | 0.4%Ib | 0.4%Ib | |
Constant | Active | Kh1.0/Kh/1.6/Kh2.0 | Kh1.0/Kh/1.6/Kh2.0 |
Form | 1S | 2S | |
Display | Type | LCD | LCD |
Digit | 5+0/5+1/6+1 | 5+0/5+1/6+1 | |
Power Consumption | Voltage Circuit | ≤1.5W | ≤1.5W |
Current Circuit | ≤2VA | ≤2VA | |
Communication | Interface | Optical/Infrared/RS485 (Optional) | Optical/Infrared/RS485 (Optional) |
Protocol | MODBUS,DLT/645,IEC1107 | MODBUS,DLT/645,IEC1107 | |
Temperature | Working Temperature | -30℃~+60℃ | -30℃~+60℃ |
Storage Temperature | -40℃~+70℃ | -40℃~+70℃ | |
Humidity | ≤95% | | |